Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 12-31-2018, 01:23 AM
etype2's Avatar
etype2 etype2 is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: Valley of the Sun, formerly Silicon Valley, formerly Packer Land.
Posts: 1,620
Update from Mike, December 30, 2018. Day 152

Greetings Marshall. We are finished with the bottom of the chassis, at least FOR NOW. Picture #1 is the top of the chassis again, and it shows nice clean capacitor cans that have been replaced. The rest of it still needs a lot of cleaning and yet, some more components replaced. For now, it is time to rebuild the tuner since the lubricants have long ago turned to something more like plastic rather than grease or oil. But first, I have snapped a picture of the “HUE” control that you speak of and have asked it to be moved to the front of the chassis. This is not going to happen. The HUE control is NOT a POT. It is a coil. There is a flexible cable that is manufactured to fit the top of the slug of the coil and that is their method of changing the phase relationship of the colors. I do not see a “good” way to move this control. It would be problematic since the controls on the front panel are all below the “plane” of the chassis. Anyway, Picture #1 shows this issue. Picture #2 shows the chassis with the nice new electrolytic cans and a “somewhat” dirty chassis. This will be cleaned up a bit during the next restoration phases.

Picture #3 is before the tuner removal.
Picture #4 is the tuner removed.
Picture #5 is the cover removed and you can now see the corroded condition of the contacts on the channel elements.
Picture #6 Channel strips removed.

Picture #7 Inside tuner main shaft removed.

Picture #8 Tuner contacts and body cleaned. And all resistance values checked.
Picture #9 Main shaft and Fine Tuning shaft before cleaning.
Picture #10 Fine tuning shaft, contact spring and detent wheel before cleaning.
Picture #11 Parts ready for re-assembly.
Picture #11 Parts ready for re-assembly.
Picture #12 Drum and detent installed.
Picture #13. All strips re-installed, the cover is on and the tuner is ready to re-install.

Tap on images to enlarge. See this link to view 13 images full size. https://visions4netjournal.com/westinghouse/



__________________
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:47 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.