Sentinel 400 No High Voltage

[Rudy18d]

Thanks to all that replied. High Voltage issue is resolved.

As Timmy eluded to in his message, it was user error. I guess I am so used to newer electrolytic cans' mounting tabs being to ground through the chassis, that when I replaced C26 100uf Electrolytic, I didn't notice that the mounting tab only connected to the phenolic and not to metal, so it was essentially connected to the pos 100 uf so when I clipped the positive lead off the capacitor and relocated to the new 100 uf, I just left it soldered to the tab thinking that was something that needed to go to a ground. That was the 115 vac I needed. Slow down! Pay attention.