Starting a Zenith 16h23 - Videokarma.org TV - Video - Vintage Television & Radio Forums

		Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV
Starting a Zenith 16h23

Notices

Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html


	We appreciate your help in keeping this site going.

Thread Tools

Display Modes

03-24-2025, 08:21 PM

damen

VideoKarma Member

Join Date: Feb 2008

Location: Portland, OR

Posts: 656

There should be quarter inch screws with washers around the outside perimeter of the CRT attaching it to the bezel, one or two on the top and also on the left and right. Be careful pulling the chassis and CRT out as the CRT is supported with that bracket around the yoke and you don't want to exert too much pressure as it's removed from the cabinet.

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 09:26 AM.