Hallicrafter 509 image shifted horizontally

[ohohyodafarted]

Originally Posted by Kevin Kuehn

Just out of curiosity does the horizontal hold work normally, as in can you move the picture slightly left or right t before losing horizontal lock? You should have the horizontal hold control centered when you make the horizontal oscillator coil adjustment. Ordinarily you wouldn't need to move the slug far to get lock unless someone previously messed it up. While you have your scope in there verify that the saw tooth frequency at the grid of the horizontal output tube is correct.

Yes the H hold works normally. I have the Horizontal hold control optimized at the center of it's range, and when you adjust the control the stable image (and the vertical band) will shift slightly left and right depending on which way you turn the control. IE: it seems to be working perfectly normal.

Next step is to start looking at the wave forms in the article you posted.

BTW, what should the frequency be, at the grid of the 6BG6? 15.734 Khz?

I may not get to that today. Got some other things I need to do.

Thanks for your help,
Bob G.

[Kevin Kuehn]

Originally Posted by ohohyodafarted

BTW, what should the frequency be, at the grid of the 6BG6? 15.734 Khz?

15,750 Khz.