15GP22 Latest News!!!!!

[ohohyodafarted]

I just got word that Scotty has John Folsom's 15GP22 in process in the evacuation oven as I write this post.

John's tube was originally under vacuum. This one is NOT a leaker and is a standard rebuild.

I will update as soon as I hear anything from Scotty!



UPDATE 1: I just spoke to Scotty. The tube will be in process until about 4PM which is when "pinch off" will occur. The oven will not be cool enough to open until several hours later. Being a Friday, Scott doesn't plan to be at the plant over the weekend, so we will not know the results until probably Monday. Scott has my cell phone number, and in the outside chance he does go down to the plant over the weekend and has anything to report to me, I will update again.

Scott said that the new stems we had made are working GREAT! We seem to have resolved the cracking glass problem that plagued us for almost 2 full years.

On another note: Scott got a call from Erv at the crt rebuilding division of Video Display Corp. Scott went out there to see if there was anything that he could use. Scott bought some glass for re-necking tubes, but ther rest of the plant was geared to high volume production and was not suited to Scott's rebuilding business. VDC is no longer rebuilding any tubes.




Bob

[zenithfan1]

Excellent! I eagerly wait to see what happens........

[Charlie]

Wishing Scotty & John best of luck with this.

Curious... once the 15G is finished, what will be its new home? A CT-100?

[ohohyodafarted]

I don't know Charlie. So far as I know this tube was one of John's dead spares. Come to think of it I believe he purchased it from another collector in hopes that we could some day rebuild it.


Bob

[zenithfan1]

Buy it from John for your set if he'll let you Bob. Just a thought. That functional CTC2 chassis of yours is lonely I bet Good luck guys! I really hope this can happen after all that is invested.

[Sandy G]

It DOES seem like in 2009 we could easily replicate 1954's punk-ass technology...A KID oughta be able to do it...Yeah, right.....(grin)

[Charlie]

Originally Posted by Sandy G

It DOES seem like in 2009 we could easily replicate 1954's punk-ass technology...A KID oughta be able to do it

Man, ain't that the freakin truth!!! And to think of all it's taken for those guys to get to this point... you'd think there'd be an easier way!

Regardless of what the tube goes in... just having a recently rebuilt 15G will carry LOTS of weight!

Big balls in Cowtown, boys!

[stromberg67]

Man, that is great news. ladies and gentlemen, LINE UP YOUR DUDS!!
Hey, is Scotty still doing 21AX's? My best one has a slight crack in the neck and could go to air anytime.
Kevin

[ohohyodafarted]

Yes, Scotty is still doing 21AXP22's It is not cheap, but well worth it. I had one rebuilt and it now lives in my 21ct55. The picture is just georgeous.

Call Scotty for a quote. I am sure he will do a super job for you.

Bob

[ohohyodafarted]

I wish there had been an easier road to get where we are now Charlie.

Out biggest obsticle has been that we are now at the end of the crt era. There is almost no one left in the CRT industry. We have one company that can rebuild the guns, and they are getting near the end of doing business. There is one company that can make stems for us in the US. And we are down to one crt rebuilder, Scotty.

Scotty has worked with us every step of the way, and I can't tell you how dedicated he is to winning the fight to be able to restore these crt's. Without Scotty, we would be SOL. We are also fortunate that Scotty is not to far from Milwaukee, and I can drive there in only 8 hours. When we get to the stage where we are actually attempting to seal and rebuild the leakers, it will be necessary to work hand in hand with Scotty at his plant. We will be performing the sealing protocall experiments and Scotty will be doing the usual crt rebuilding things.

I know that it has been an agonizingly slow road getting to where we are today. But most of the difficult work is done now. We have special tooling and equipment to remove the old cathode assemblies. We have a company to make stems that work. We have a gun rebuilder to install new cathodes and mount the guns on the stems. We have Scotty on board to do the rebuilding and we have even machined some special parts for Scotties equipment to accomodate the unique parts of the 15GP22. We have special equipment built for our experiments in sealing the leakers, and we have developed special techniques for preping the tube for the sealing process.

It seems like it should have been a lot easier than it actually was, but you have to understand we are not working with a tube that anyone has ever tooled up to rebuild. So everything had to be custom made. Every step in the process had to be painstakenly researched and developed.

It has however been a labor of love, on a quest to do something of spectaular importance for all tv collectors interested in this very historic color tv artifact.

Please...everyone think good thoughts and say your prayers, and perhaps we will finally be rewarded with success.

[Charlie]

Kevin: The color in those screen shots is absolutely stunning!!

[stromberg67]

Thank You, gentlemen, for the kind words. It was a labor of love to restore that chassis, and I took my time and documented the whole process. I have a restored 5N chassis waiting to be reunited with its cabinet, and a blonde 7 that I am digging out right now. Two good spare 21CY's too. Much to keep me out of trouble this fall and winter!
Kevin

[ohohyodafarted]

http://videokarma.org/showthread.php...97#post2957997

[Bill Cahill]

You guys should see the rebuilt 19" color tube Scotty did for John Folsom.
Scotty is truly a genious!
Bill Cahill