Quote:
Originally Posted by compucat
Did you replace the high voltage caps with tubulars? When I did my TS-18 chassis I used ceramic discs and they did not work well in the vertical. I would check every resistor and cap in the vertical oscillator and output circuits. Also check for wiring errors. Despite being careful, it does happen. These chassis perform well when restored.
|
Well I am using ceramic disc for now and I know they work since upon getting done recapping it had a great pic and clear. I already checked all resistors more then once and replaced a few but that's it. I have several others like this, 2 ts18 s and ts4ds and they work great but this one is giving me a run for sure.its like something failed shortly after running it but can't find it. I have a cap checker and the discs I'm using for now are fine.