![]() |
|
|
|
#1
|
|||
|
|||
|
Zenith 25CM30
On my 25CM30 and also 26KC20 When there's a bright or white background the images in front of the white all of a sudden gets too much contrast and the color saturation increases making the rest of the images look dark. What's wrong? The AGC control is set per manual. Thank you, Perry
|
|
#2
|
||||
|
||||
|
IIRC they had a "blanking" tube ( 6KT8 or 6GH8 ? ). Try a NOS or KNOWN good tube. Dont trust a checker ! Sounds like the video is dropping out but
the color stays so look at the video chain. AGC was a good try but AGC overload usually also gives tearing & audio buzz. Good luck Zeno ![]() LFOD ! |
|
#3
|
|||
|
|||
|
There are a few 6kt8 in the color circuits.Which one controls blanking and what does it blank.Thanks for the information. What's IIRC?
Last edited by iong; 09-13-2024 at 05:19 PM. |
|
#4
|
||||
|
||||
|
Stands for "If I Recall Correctly". Welcome to the internet.
__________________
We're all in the same boat. |
|
#5
|
|||
|
|||
|
Oh.
|
| Audiokarma |
![]() |
| Thread Tools | |
| Display Modes | |
|
|