Rare find! A Magnavox Brittany tv!

[Yamamaya42]

OK, now that it looks like the site is working again.

After much time and testing, I'm pretty much at the point to where I'm ready to put the chassis back into the cabinet, still no wax loss from the FBT, come up stable every time, horizontal linearity still not perfect, but a LOT better then it was before.

Not sure what else I can do to it.

[Yamamaya42]

Chassis ready to be put back in, as mentioned, not quite perfect, but much better than it was.

http://suzaku.live-evil.org/0922251958b.jpg
http://suzaku.live-evil.org/0922252001a.jpg

[Yamamaya42]

Well, I did contact Moyer electronics last Fri 9/26 to see if it was possible to get the right FBT, so far not a peep back from them.
Any idea how long it takes for them to reply?

[Alex KL-1]

Originally Posted by Yamamaya42

Well, I did contact Moyer electronics last Fri 9/26 to see if it was possible to get the right FBT, so far not a peep back from them.
Any idea how long it takes for them to reply?

Mee to, some time ago I'm not received response from them, when I requested a flyback.

[MuzzcoVW]

Originally Posted by Yamamaya42

Well, I did contact Moyer electronics last Fri 9/26 to see if it was possible to get the right FBT, so far not a peep back from them.
Any idea how long it takes for them to reply?

It can take Bill a while, but he's always gotten back to me. If you left a part number, he will look through their stock before responding, and that can take a while. Ive bought a couple flybacks from them and no problems but it did take a couple weeks

[Yamamaya42]

Originally Posted by MuzzcoVW

It can take Bill a while, but he's always gotten back to me. If you left a part number, he will look through their stock before responding, and that can take a while. Ive bought a couple flybacks from them and no problems but it did take a couple weeks

I gave detailed info..

---
Replacement Flyback needed, parts inquiry
Info
TV type
Magnavox Brittany tv the chassis is a ct-245
Original PN# 320035-1 damaged from exposure.
possible replacements.
Thordarson FLY 4
Merit HVO-5
Stancor A8119
Triad D55
Ram X077
right now using a Ram X032, cause I could not find anything else, works but is not the right part, causes slight horizontal linearity issues, please let me know if you have the right one, or can find one.
Thanks.
----

[Yamamaya42]

Chassis is now back in the cabinet.

http://suzaku.live-evil.org/1014252118.mp4

I have done all I can till i get the right FBT.
3 weeks now, and still no reply from Moyer electronics.

[Yamamaya42]

one month and no reply from Moyer electronics.

[bandersen]

I've been waiting almost a year about a flyback and given up on them.

[Electronic M]

Jeez....You think they'd at least have the courtesy to tell you they don't have one if they've checked.

[Yamamaya42]

Originally Posted by Electronic M

Jeez....You think they'd at least have the courtesy to tell you they don't have one if they've checked.

exactly...

[bandersen]

Shango helped me out with Moyers and a new flyback is on the way for my Computer Space project.

He knows Bill the Owner who is a good guy and says they have loads of vintage TV parts.
You really need to pick up the phone and call them.
(570) 286-6707

[timmy]

Originally Posted by Yamamaya42

one month and no reply from Moyer electronics.

Hey moyers may have the flyback all you have to do is call them and ask for bill and tell him you are a friend of Tim from New York and then ask him about the flyback don’t mention you have been waiting or that you had called already.

[Yamamaya42]

The maggy in the new location, for now! :P

http://suzaku.live-evil.org/20251108_165833.jpg

http://suzaku.live-evil.org/20251108_165718.jpg

[Yamamaya42]

Probably should have changed some more of the resistors in the vertical oscillator area even though they tested OK 15% of what they were rated, as it's hard to get lock when first turned on,cold, but after warm 10 min it's VERY stable and fine for hours.