Quote:
Originally Posted by andy
The convergence yoke should line up with the convergence pole pieces inside the CRT neck. They are just in front of the final grids in the electron gun, and you should be able to see them if you look into the neck. In practice, it's not super critical, but try to get it close.
|
What would the pole pieces look like? As you can see in the first photo, there's a plastic sleeve over the CRT neck in the area where the convergence assembly is located.
I believe I've tried flipping the stick magnets every which way, including endwise, but it couldn't hurt to try again. Can they become demagnetized? I suppose I could try to remagnetize them by petting with another magnet, but that seems a little off the wall. They still have some (approximately equal) magnetism left, as I determined with my trusty old hiking compass.
Phil Nelson
07-19-2009, 11:26 AM
Threaded Mode