Can we discuss DC restoration circuits?

[cbenham]

Originally Posted by miniman82

why not use the LM1881 to trigger the comparator, thereby stabilizing the black level before the beginning of each horizontally scanned line?

This may work, however you might need to experiment with the value of R set on the LM 1881.

Its nominal value is 680K for NTSC signals, but I have had problems with the resulting pulse being slightly too wide to properly drive a clamp. I've reduced R set to 470K or 560K with better results.

The pulse must start and end during the back porch time and must not extend past the end of the H back porch.

If it does, the clamp will be clamping to a voltage other than ground, the usual voltage level of the back porch portion of the waveform.

Hope you are successful.

Cliff