|
The bandpass is the tough part, without directions on what to bias where and how its going to be tough. Leave the bandpass alone unless you have clear instructions. That includes the 4.5 trap, it seriously effects the chroma bandpass.
The rest you can pretty much setup by eye.
Ground out the color afc signal so the afc is not controlling the oscillator, adjust the osc coil for the slowest moving rainbow. (zero beat) When you do that I recommend you use your daily programming source and not some old color bar generator.
Then center the tint and adjust the phase coil for the correct color bars.
|
02-13-2011, 09:40 PM
Threaded Mode