|
|
|
#15
06-09-2011, 01:18 PM
|
||||
|
||||
|
Whoops, you're right teevee about the + going to ground. I was just following that line right across to the left to pin 1 and tripped over everything in my path! Now where are my glasses...
 Looks like per the photo and the schematic, pin 4 is a ground point as well as the heater connection. A ground lead also goes to the center shield post of the tube socket.
__________________
Reece Perfection is hard to reach with a screwdriver. Last edited by Reece; 06-09-2011 at 01:22 PM. 
|
| Audiokarma |
|
|
Threaded Mode