Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Recorded Video

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-25-2012, 05:56 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
RCA not Y2K

Man... I'm getting OLD..... Have any of you run across this, because it's new to me. I dug out the first VCR I bought new. An RCA Model # VR334. I purchased it with Christmas money on 12/26/91, and if memory serves.. it was $229.00 (and that was for a MONO "plain jane" deck)
I actually had to put it into use today, and as I was programming the time/date, you could NOT enter in the year 2012. I played around with different years to get the day correct and 2001 worked. It doesn't seem like it was that long ago when I bought it, but I wrote the date in the book... man... 21 years ago. (time flies)
Reply With Quote
  #2  
Old 08-26-2012, 07:07 AM
Tony75's Avatar
Tony75 Tony75 is offline
VideoKarma Member
 
Join Date: Sep 2004
Location: Newcastle, Australia
Posts: 25
My Mitsubishi HS-761V started that either this year or last. It was bought new in 1997, so has had even less of a run than yours. The much older ones, usually of 80s vintage didn't have years so they weren't affected as such.
This machine doesn't record much these days so its not really an issue. It usually shows the wrong date but the numbers are so small you can't see them across the lounge anyway, so not really an issue.
Reply With Quote
  #3  
Old 08-26-2012, 12:34 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
Ya.. I guess it's something I never thought of. RCA probably didn't think this was going to be in service 21 years later, so it was probably a non-issue.
Interesting story on this, that I commented on in another thread, but the reason it went back into into service was because the POS Magnavox combo unit my Aunt bought, broke in 1 day. She only tapes one show. So I told her I would set her to just take it back and I would set her up with a deck to use. I have better ones, but she's kinda dippy when it comes to setting the timer, and RCA I think had the most user friendly program guide out of any deck. I tell ya tho.. the RCA was reluctant to operate after being stored for 10 years. Fow awhile it wouldn't take a tape, but finally that got unstuck, so hopefully all is well.
Reply With Quote
  #4  
Old 08-26-2012, 02:16 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
I have a Panasonic PV-4022 VCR which I bought new in 2002. The calendar seems to go well beyond the year 2000 -- starts at 1997 and ends at -- gasp! -- 2096 -- ninety-nine years (!).

I don't believe for one second that Panasonic expects its VCRs to last over 90 years. (The last Panny VCR I had before this one went bad in two years.) I know that in their ads they used to say (I don't know if they say this anymore in their current ads), "Do you have a DVD player or VCR that just won't die? (It's) probably a Panasonic", but to put timers in these things that can be set for any date up to 99 years in advance -- sheeesh, that's too much.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #5  
Old 08-26-2012, 02:39 PM
lnx64's Avatar
lnx64 lnx64 is offline
VideoKarma Member
 
Join Date: Jan 2012
Location: New Port Richey, FL
Posts: 1,787
Hmm, looks like my Sony VCR is ok!

Reply With Quote
Audiokarma
  #6  
Old 08-26-2012, 03:07 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by lnx64 View Post
Hmm, looks like my Sony VCR is ok!

Did you look at the timer on the VCR hooked up to your sister's Hitachi TV and used as a cable box? Does that VCR's calendar go at least to 2075? Depending on when it was made, it probably should. That VCR looks like a slightly newer version of my Panny PV-4022, or perhaps it is a -4022 in a silver cabinet.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #7  
Old 08-26-2012, 03:14 PM
lnx64's Avatar
lnx64 lnx64 is offline
VideoKarma Member
 
Join Date: Jan 2012
Location: New Port Richey, FL
Posts: 1,787
It's a PV-V4523S.. Looks like it goes as far as yours.
Attached Images
File Type: jpg pvclock.jpg (18.5 KB, 24 views)
Reply With Quote
  #8  
Old 08-26-2012, 09:42 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by lnx64 View Post
It's a PV-V4523S.. Looks like it goes as far as yours.
Thanks for the info. I was just asking out of idle curiosity, and to compare that VCR to mine to see if the timer was the same 99-year one that most Pannys probably had.

The clock setting screen looks exactly like mine, and so does the end date for the calendar. Only difference is, my VCR is mono (PV-V4022 as opposed to PV-V4022S, if Panasonic actually made a stereo version of the -4022).
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #9  
Old 08-27-2012, 03:40 AM
waltchan waltchan is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 571
Toshiba VCRs had LIFETIME calendar...

Toshiba was the first VCR manufacturer in the world to put in a LIFETIME calendar, first used in the SV-771 S-VHS model. The first two digits were omitted, and only the last two digits were used. So, if it's 99, it returns back to 00, doesn't matter if it's year 1999 or 2999.

Toshiba shows great optimism about the longevity of its VCR. Previous experience with Toshiba products justifies it, although it`s doubtful that this VCR will last as long as its calendar, nor will any of us.
Reply With Quote
  #10  
Old 08-27-2012, 09:40 AM
uxwbill uxwbill is offline
VideoKarma Member
 
Join Date: Jun 2012
Location: Illinois
Posts: 52
One of my oldest regularly used VCRs is a rather cheap ToteVision branded machine (made by Goldstar). It's old enough that you operate all the functions through a vacuum fluorescent display panel.

Its built in calendar works with a four digit year and it's good from sometime in the mid-70s (!!!) until the early 2100s.
Reply With Quote
Audiokarma
  #11  
Old 08-28-2012, 06:02 PM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
+1 on Toshiba longevity (now with fingers crossed since I probably jinxed mine!)
__________________
Reece

Perfection is hard to reach with a screwdriver.
Reply With Quote
  #12  
Old 08-28-2012, 06:11 PM
waltchan waltchan is offline
VideoKarma Member
 
Join Date: Aug 2005
Posts: 571
Quote:
Originally Posted by Reece View Post
+1 on Toshiba longevity (now with fingers crossed since I probably jinxed mine!)
The best ones Toshiba ever built were the 1990-1991 models. It's called the MBK-76 chassis that Studio Sound Electronics, the largest source of VCR parts, liked to name.

http://www.studiosoundelectronics.com/mbk-76.htm
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:13 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.