CTC 5 Low high voltage

[radiotron]

Originally Posted by oldtvsandtoy

ok here is where I stand right now. I pulled the shunt reg cap off the 6BK4 and disconnect the HV anode wire to the CRT Still only 9k. I then put the chassis in my other ctc5 and the same thing. Only see 4 fuses, one being a piece of wire. All good. Flyback is not getting hot. How much can I check with the chassis out of the set?

do you think the yoke could have anything to do with it?
OR a break in the board, cracked solder etc.?