![]() |
|
#1
|
||||
|
||||
|
blu-ray players
Over the years, I've heard about and seen blu-ray players in various advertisements; but, they were fairly expensive and I never felt the need to get one.
Last week, someone I know bought several blu-ray players for Christmas presents and he wanted me to connect the one he'd bought for himself to his regular CRT TV and one to his father's flatscreen. What he had were Panasonic models and he bought them from Sears for around $70. These had both an HDMI output, as well as the standard red, white, and yellow output jacks and there was also a setting in the menu to select between 16:9 and 4:3. Since these players are coming down in price and will play standard DVD's, I suspect that, in the near future, regular DVD players will be phased out in favor of blu-ray players that will play everything. I realize that names don't mean much anymore; but, Panasonic seems to be one of the few brands that makes decent stuff and those $70 players seem to be a good deal, if they'll hold up.
__________________
http://www.youtube.com/user/radiotvphononut |
|
#2
|
|||
|
|||
|
...
Last edited by andy; 12-05-2021 at 08:05 PM. |
|
#3
|
||||
|
||||
|
Quote:
![]() I have an extended warranty on the Blu-ray, though, but I hope I don't have to use it. The player has been working well since the day I installed it with a composite cable, adding an HDMI cable a few months later -- but I cannot notice the difference in the picture when connecting the player to the TV with the latter. Maybe it's because my flat screen TV is just 19 inches and I sit some ten feet away when I watch it, thereby negating the HD effect? ![]() The reason the newer Blu-ray players do not have analog outputs is to prevent illegal copying of DVDs. Using a standard DVD player with video/audio outputs and a DVD recorder, it is all too easy to run off as many copies of a commercial DVD as one wants, unless the discs are copy-guarded as most commercial DVDs are these days. However, any technically-savvy user of this type of equipment can find ways to get around the copy protection (I believe there are even computer programs available to allow just that), so even copy protection isn't 100-percent foolproof. I remember years ago, when NBC (when that company still had its radio network) aired, over the NBC radio network, its 60th anniversary celebration program in 1986. There was a warning at the end of the program: "This program may not be reproduced, duplicated, or recorded, in any manner whatsoever." Two or three short audio tones followed the warning; I believe these tones were used to trigger a crude (by 21st century standards) copy-protection scheme. However, I doubt if it actually worked as intended, as I am sure many people (myself included) recorded that broadcast on audio tape for posterity. I lost my own audio copy of the show years ago in a move, but I'm still going to try to find it online so I can download it to my computer and thence to a CD-R disk. I already have NBC's 75th anniversary broadcast on VHS, but there were certain parts of the 60th anniversary show I'd like to hear again (such as the old radio commercials for now long-defunct companies like Allis-Chalmers, which manufactured farm machinery in, I believe, the '50s through the seventies -- I still remember the jingle: "The world needs more...of what Allis-Chalmers makes!") Who knows? Maybe that jingle is on the NBC 75th anniversary broadcast as well.
__________________
Jeff, WB8NHV Collecting, restoring and enjoying vintage Zenith radios since 2002 Zenith. Gone, but not forgotten. |
|
#4
|
|||
|
|||
|
...
Last edited by andy; 12-05-2021 at 08:05 PM. |
|
#5
|
||||
|
||||
|
I might have to invest in one of those HDMI to composite converters. Too bad they usually suck, either not keeping the aspect correct, or not having a zoom function (if the player is pillar boxing on a 16:9 video output, then the converter going to a 4:3 TV, giving you boxes around the entire picture).
|
| Audiokarma |
|
#6
|
||||
|
||||
|
Another reason for the elimination of analog outputs is to try and force people into buying new TV's.
__________________
http://www.youtube.com/user/radiotvphononut |
|
#7
|
|||
|
|||
|
I wanted to buy a Blu-Ray player solely to be able to watch Blu-Ray DVD's borrowed from friends. I currently use a standard DVD player and rent DVD's from Netflix. My DVD player is connected to my 24" CRT TV through the component inputs for the best picture my TV is capable of delivering. Of course, no component outputs on any Blu-Ray player made after 2010. So I'm considering buying a NOS or refurbished Blu-Ray player made in 2010 or earlier, or else just forgetting about borrowing my friend's Blu-Rays. But I foresee the time when standard DVD's will be extinct and everything will be offered on Blu-Ray (or it's successor) exclusively.
|
|
#8
|
||||
|
||||
|
I picked up both of my Panasonic BD players from the Thrift Store, one was in their auction, it was only a year old at the time and I got it for $30.
The second was on the electronics shelf for $15.00 untested, a couple years old and it was also network capable, neither had a remote but the remote for my TV works with them so it's OK. They are both just old enough to have Component outputs on them. Don't understand the pricing system at this store since they are now asking $35 for a low end Sony DVD player (and not getting it) I don't think eliminating analog outputs has as much to do with copying as it does with cost savings, as Andy pointed out it's much easier to make a bit perfect copy in on a PC than to make an imperfect copy through the outputs. |
|
#9
|
||||
|
||||
|
A Sony DVD player that likely cost $29 when new. My friend, who sells second hand stuff, gets $10-$20 for DVD players.
__________________
http://www.youtube.com/user/radiotvphononut |
|
#10
|
||||
|
||||
|
I use a Sony BR player that has all sorts of analog outputs. Component, S-Video, and composite.
I use it on my TV. http://img.photobucket.com/albums/v3...n/_IGP7061.jpg |
| Audiokarma |
|
#11
|
||||
|
||||
|
A friend of mine has a LG blu-ray player and the macrovision has not been activated. He made a copy of "Avatar" with no problems from it.
|
|
#12
|
|||
|
|||
|
Indeed, almost all new BluRay players have eliminated the "component" 3-cable video outputs necessary to hook up to HD capable first generation High Definition CRT TV's and projectors. I bought a couple of used units for this.
|
|
#13
|
||||
|
||||
|
Quote:
The Macrovision would affect the recorder so possibly he used something with no Macro or with it disabled. I'm not sure Bluray uses Macrovision at all, I know they are encrypted but that's been broken for a long time. |
|
#14
|
|||
|
|||
|
My TV is 480i analog, but I was under the impression you'd still get a better picture using the component inputs rather than the composite inputs. If there would be no difference (or visable difference on my 24" TV) then maybe I'm worrying about nothing. I assume they put the component inputs on there for some discernable difference, though.
|
|
#15
|
||||
|
||||
|
Quote:
|
| Audiokarma |
![]() |
|
|