CRT "disarming"

[zeno]

I think all your sets are solid state. Most will bleed off
quickly & have little or no charge.
Sometimes after discharging one it will come back a little.
Besides the anode the only place you may have a charge is the
anode lead. So do it like this.....
Discharge set several times over a few minutes.
Attach anode lead to chassis ground like the tuner or IF shield.
Before moving discharge again. Carry with anode away from you.
Only carry by the screen never by the neck.
If you do get nailed the danger is dropping the tube not
the shock.

73 Zeno