Quote:
Originally Posted by Hagstar
WELL that's encouraging, I will recap my Triplit sweep generator very soon then.
They also want you to disable horz. sweep though to remove the flyback derived reference pulse. THEN to compensate for the huge loss of load they show a bank of light bulbs in series or a honking resistor to serve as a dummy load lest the voltage go wild.
John H.
|
Before I "fired up" the h-sweep in my CTC-4, I cobbled a couple of 100 watt resistors to the proper value and did voltage checks, etc. Worked out as the set came right up with raster upon full power up. Those resistors became super hot after a few minutes and could have roasted hot dogs suspended by strings above them.
Almost wish I had another CTC-4 to bring back to life.
Kevin
02-12-2016, 05:00 PM
Threaded Mode