|
So the sticky glue which fries semi hard.. Does acetone cut it? I had mixed results on an oaktron 12", acetone softened the glue holding the dust cap but didn't touch the glue holding the cone in place. I've read that toluene, and MEK are both capable solvents, and also isopropyl alcohol. I want to get my hands on some toluene and check it out... My intention is to non destructively remove the cone for later reuse.
That sticky glue that dries semi hard sounds like PVA, which is what a lot of people seem to recommend.
|
03-07-2016, 02:23 PM
Threaded Mode