|
|
|
#33
08-20-2018, 09:20 PM
|
|||
|
|||
|
I noticed that the wire going to the Plate Cap from the 6DQ6 Horizontal Output tube was missing some insulation where it enters the cap. I looked closer and noticed that the inside was was corroded green and needed attention.
I replaced the wire with some 20KV wire that I have. I also used a silicone grommet where the wire exits the HV cage. Dan Jones gave me this tip at his presentation at this years ETF Convention. All better now.    
Last edited by Crist Rigott; 08-21-2018 at 12:55 AM. 
|
|
|
Threaded Mode