|
|
|
#11
08-25-2022, 08:29 AM
|
||||
|
||||
|
This 150 ohm resistor if it burned up down to 95 ohms would this alone cause the tube to go full on ? If zero ohms at pin 2 will cause the tube to go full on then how can the tube go full on if there is any voltage getting past c55 and c56 that would have voltage at pin 2 so I would think if it’s not zero and there’s voltage present then the tube wouldn’t be full on. I checked the volume pot it measures 2.4meg wiper varies ok. So just changing the burned resistor should this fix this at all.
|
|
|
Threaded Mode