|
I dont know half of what you guys know when it comes to these tvs but I don’t get why the voltage drops once they are plugged in. Can I test the selenium diode with a dvm.I have noticed that when the vertical is running you can usually here it at the yoke all my other color sets I was able to here it this one I don’t. So if the vertical is not running that maybe pulling down the b+ since there is a 385v on the primary side of the output transformer or maybe no running at the correct speed.well I know if the vertical quits then I have a horizontal line but maybe not running at correct speed.
Last edited by timmy; 08-29-2022 at 06:03 PM.
|
08-29-2022, 04:18 PM
Threaded Mode