Motorola ts907 low hv

[timmy]

Originally Posted by Yamamaya42

very likely an error, as V2 has an near identical bias on the pin and it's in the 6.3k range, but this has been pointed out before.

Yes they are nearly identical but v1 is not v2 there has to be differences between the 2 or they wouldn’t have v123 it’s just odd get some video on v2 but v1 nothing and that’s the one with a discrepancy. The difference between v1 and v2 is that v1 8.2 resistor goes to ground the 8.2 don’t go to ground directly on v2.