Quote:
Originally Posted by timmy
Ok tried the 2 .001 caps in L4 made no difference but v1 pin 8 is 100v but pin 7 is only 200v should be 210v after a couple of minutes and the 275v buss is only at 260v I cannot figure out why this b+ is low something here still seems to be pulling it down. The voltages are the same on v2.
|
you are putting too much emphasis on the voltages posted in the SAMS, it's not unusual for there to be variances of 10-15% or even more and it being perfectly fine, no two sets are alike, even more so as they age.
11-04-2022, 09:23 AM
Threaded Mode