1970s Zenith Console - Troubleshooting

[zeno]

Originally Posted by Findm-Keepm

If you are looking for a Zenith voltage divider, look also at the Sylvania ECG replacement types - the Hi-Div series. An ECG Hi-DIV-3 replaces the 63-9896, 63-9897,63-9898, and the 63-9898-02. Various Mounting positions are possible with the ECG replacements too - unlike the Zenith OEMs.

The Internet archive has the ECG replacement guide from 1989, if you wish to look at the HI-DIV-3 data.

https://archive.org/details/EcgSemic.../n469/mode/1up

Brian
The thing we were trying to do is stay OEM if posable. Reason for that is
in the 80's we had a few with jail bars & a few have shown up here also.
The common thread was new caps, tripler, divider were replaced.
The 800-616 kit did not sub some dividers IIRC the 14 & 16 inch
chassis. Also the kit had the barrier & a plug for the focus. It did
sub any hybrid chassis that had a divider. With some Zenith parts
like CRT sockets, A minor difference got a new part ## but no subs.
Almost all delta sockets were the same for abt 10 yrs. The difference
was plugs & lead length, one could sub them all.

73 Zeno