Zenith Color Roundie Alignment with B&K 415

[bhegges]

OK here is where I am at:

Scope measuring on test point C1, all 7 markers are turned on, note the B&K 415 has a 41.67 marker vs a 41.75 marker which is what Zenith references. Directions are to make adjustments to the 41.25, 47.25, and 39.75 traps (L1, L2, L3) for minimum responses, accuracy of trap attenuation and marker locations.





Scope measuring on test point C2, same 7 markers are turned on. Goal is to make adjustments to the converter plate coil and 1st IF coil (T1) to match the response and also to adjust the 2nd and 3rd IF coils (T2, T3) for maximum response and to approximate the response curve.