Mitsubishi 6CT-333 "Trinescope" color projection TV restoration

[cj_reha]

Originally Posted by Electronic M

Great work so far. I do see one thing I find concerning....That last pic of the lytic you're restuffing the leads between the old and new terminals are bare and look long enough that when assembled they could potentially short to each other or the can. If I were you I would desolder one end of each, slip some heat shrink over and resolder. It would suck if they shorted and took out something hard to replace.

Don't worry - the wires weren't soldered in place yet, I just ran them through the drilled holes for a photo. I only wrapped & soldered them once the lid was on top so there's no excess length and no chance for them to short on anything