|
|
|
#3
06-11-2025, 08:29 AM
|
||||
|
||||
|
I typically buy 1W and 2W resistors (most 1W are the same size or smaller than the 1/4W -1/2W carbon they typically replace) from mouser or digikey and I haven't had issues despite only sometimes bothering to spec high voltage. The place to be careful is B+ boost (600-1500V) focus dividers, and electrostatic deflection sets that divide 6KV with multiple resistors. The higher 100k-10M parts I try to spec higher voltage for.
Another possible issue is if the film is an inductive spiral and your using it in tuner or IF circuits.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 Last edited by Electronic M; 06-11-2025 at 08:34 AM. 
|
|
|
Threaded Mode