Quote:
Originally Posted by redk9258
How did you get it working?
|
Well I thought it to the a transistor on the transport board, but upon testing once removed, it tested good, so I put it back in. I then figured it had to be something in the pause circuit as that would release the solenoid. I then realized that there is a port on the back for a wired pause button. I cleaned it and the contacts on the pause arms that get connected when the pause button is pressed. It worked after that, so I don't know if it was the contacts or the port. Should have done one then the other, but you know how that goes.
Now I just need to get back to the image I had before the solenoid issue. I am about to clean the tape path and heads. Wish me luck.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
06-15-2025, 06:38 PM
Threaded Mode