|
|
|
#26
04-04-2026, 04:35 PM
|
||||
|
||||
|
I have tested all the resistors in the setup circuit from the switch to the convergence board. So don't know enough about reading schematics to understand why setup connects the video outputs to the inductor coils on the convergence board. I'm pretty sure when you flip the switch it's main function is to disconnect all the video amps and collapse the vertical.
I've also tested all the resistors in the gain taps and they are withing tolerances. So unless I'm missing something, my inability to bring up lines in setup looks to be either in the switch itself, or the connection of the outputs to the convergence board.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
|
Threaded Mode