|
|
|
#11
04-09-2026, 03:37 PM
|
||||
|
||||
|
Never mind, ground loop. First time it's ever happen. Rotated plug and it's gone.
I haven't gotten around to doing any real adjustments as the room is too bright. I'll do them this evening. The new setup switch is late, so I left the old one in for now. Still won't bring up any lines from the G2 controls. Hopefully the new one will fix that issue. As for jailbars, here's hoping the new caps will fix it. If not, I'm going to look at removing the IF module and injecting my generator directly into the circuit on C1. Was told these bars can also come form bad RF, IF, etc. We're getting there!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 Last edited by TinCanAlley; 04-09-2026 at 03:44 PM. 
|
|
|
Threaded Mode