21fjp22a Crt Question

[John Folsom]

Dave A,

I may be wrong about the wetting action, but the bonding material completely filled the gap between the cRT face and the curved safety glass. There was no mineral oil involved. The old cataract came off in one piece, maybe 1/8" thick, a little thicker at the edge. The center 1/3 was still clear, and is rubbery and flexable. I suspect if I just separate teh two with an air gap, it will look like crap. I may consider mounting the tube without the safety glass.

Blue Lateral,

The monitor originally had a 21CYP22A, and I would very much like to find one to put it back to it original configration. But in the meantime, fixing up my poor old 21FJP22 will have to do. PVA....polyvinal acetate?

Thanks guys for the info and suggestions, keep 'em coming. I will post some photos of the monitor once I get a cRT back in it and dust if off a bit.