New Here! CTC-10C question

[holmesuser01]

I dont have my SAMS handy. I used to keep it inside the cabinet of the TV, but I've moved it somewhere. I'm good at this.

Thanks for the 109221 info on the flyback. I looked at mine last night. It is still not dripping wax.

My installation of the CTC11 fly was a fluke. I had never done that before. Flybacks were always chassis-specific in my mind.

I have a NIB flyback in my garage. I'll find it and see if it is anything that can be used here. Got it in the early 80's by mistake. They didn't want it back.

My set is just beginning to get hum bars in the video. I can see them in the playstation signal.

My set is running with an old VCR acting as its modulator for channel 3. The tuner needs a good cleaning, but since I leave it alone it isn't drifting. I ran it with a 6GH8 replacing the 6EA8 tube in the tuner for years. I had to re-adjust the fine tune, but that was all. Finally bought new tuner tubes, IF, and video tubes years ago. Made a minor difference. They are all GE's but I forgive them.

Polaraman: I owned a 1960 wagon. It was loaded. I got hit in the tailgate. Drivetrain lurched forward thru the radiator and A/C condenser. I couldn't find a tailgate, so the car was junked. I hated that. This was in 1971.