Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-31-2010, 06:32 PM
JCFitz JCFitz is offline
VideoKarma Member
 
Join Date: Sep 2005
Location: Willards,MD
Posts: 411
Zenith 29JC20 HV parts needed

Got the 29JC20 from DC working tempoorarily by bridging the 4 sections of C2 which was open. Before that I had poor sync stabiliy,poor focus,a hum bar and hum in sound,no color and a piture that was dark on the right hand side and bright on the left. Still waiting on a couple of restuffing capacitors for the filter caps.
Everything ran good,had color and everything until I heard corona with interference in the picture.Just as I peeped in the back to see the picture diappeared and I quickly pulled the plug.
I opened the HV cage where I was sure the problem was and I was greeted with the acrid smell of burnt bakelite and immediately saw the problem.

The cup like part which held the HV rectifier socket had broken out screw holes which caused the rectifier to come out of its holder and the plate cap got too close to the cage and it arced over.Being on its left side to expose the bottom of the chassis for working on it of course aggravated this .

Anybody have these parts or know where to get them?
Attached Images
File Type: jpg Zenith 29JC20 HV parts.jpg (136.2 KB, 64 views)

Last edited by JCFitz; 10-31-2010 at 06:33 PM. Reason: mispelling
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:50 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.