|
well I need some direction here with this ts18 verticle problem . After changing all Micas in the vert section and horiz and recapped all else the weird thing I have going on here is not only can I not find any bad resistors anywhere and the b+ and b++ is right on the money but there is lines jumping all over and really can't see any pic but if I take a .01 cap and parallel it to the .004 at the 6sl7 I have vert hold and almost a full screen except for some linearity loss and a great picture. One end of the .004 is ground .
|
03-08-2017, 12:36 PM
Threaded Mode