Another Westinghouse H840CK15

[trinescope]

Looks like I'm on my own as far as the convergence transformer goes, so I ordered one of those Chinese automatic coil winders and some 41AWG wire. This should make it easier to get a nice, tight, even wind and if the transformer ends up not working for some reason I can try again fairly easily. I'll first try winding the primary and see how close to 1000 ohms I get for winding resistance. That's a few days off right now. I also need to order more .1uF capacitors, and I will also get a 3.58MHz crystal oscillator for chroma demodulator alignment. My work area is in the garage, and with this 100 degree weather I'm not really doing much now.