Motorola ts907 low hv

[timmy]

Well that didn’t work but from the first day I plugged this set in it red plated one horizontal tube and it’s still doing that now only one tube and it’s now looking like the pulling down of voltage maybe in the horizontal the oscillator runs but after warm up plug in again the oscillator will not start again until it sets for awhile and cools down. I don’t know if the yoke would affect the horizontal oscillator from starting. This happened with the old flyback but I since changed the flyback with a nos one. Problem is the voltages across the board are still low it’s not like I can look at voltages and see that one rail is lower then the rest and go to that area b+ low everything is low.