|
Well so much for the resistors they made no difference I kind of had a feeling the old ones were not bad. there is 132v there but soon as putting it on pin 8 it drops to 63v so something is going on here that I’ve yet to figure out. On v1 pins 1&3 are 15v and pin 2 7.25v it’s like the tube is locked on full pulling the 132v down to 63v. So I lifted the power on pin 8 it’s not the tube pulling the voltage down pulling the 8.2k ground drops the voltage. Then with the ground off I get the proper ohms.
Last edited by timmy; 10-22-2022 at 10:54 AM.
|
10-22-2022, 09:20 AM
Threaded Mode